Product Details
Product Name |
Starter Assy |
Size |
Standard |
Material |
Standard |
Car Application |
Chery T11 |
Place of Origin |
China |
Certification |
ISO9001/TS16949 |
Max Production Capacity |
1000 Piece/Pieces per Month |
Samples |
Charge |
1. Standard Exporting package.
2. Original package or neutral package.
3. According to clients ' needs.
4. Shipped in10-35 days after payment.
A. SASO for K.S.A
B. CIQ for Egypt, Ethiopia
C. COO, certified CI for Egypt, Argentina
D. Form A for European countries
E. Form E for Malaysia
F. Form F for Chile
G. COC for Algeria, Kenya, Bangladesh, Hatti, Nigeria
In order to ensure a reliable start of the car engine, should always keep the battery in a state of sufficient power to ensure the ignition switch, battery and starter cable and the ground wire connection firm, good contact. Because the starter is designed to operate instantaneously and the armature windings operate at a high current, the start up time must not exceed 5 seconds and the start up time should not be less than 15 seconds. When the starter can not start the engine three times in succession, it should identify the cause and troubleshooting before use. Otherwise it is easy to damage the starter, or even cause the starter scrapped. Cold and cold start in winter and low temperature zone, the engine should be warmed up and then start the starter. After the engine is started, it should promptly cut off the start switch, so that the drive wheel out of meshing, reducing one-way clutch wear. When using the starter, it should be neutral or step on the clutch pedal, it is forbidden to use the method of start gear to move the vehicle. Install a dust cover for the starter to prevent dust from entering the interior of the motor and dirty commutators and other parts. Each 5000 km driving the starter and starter relay should be carried out 1 check and the movement or rotating parts lubrication. Always check starter brush wear and spring pressure.
Inquiry
Related Products