Wholesales Oil Pump Screen Collector 372-1010010 For Chery S11 QQ Sweet MVM 110

Product Name	Screen Assy Oil
Size (mm)	Standard
Material	Standard
Car Application	Chery S11
Place of Origin	China
Certification	ISO9001/TS16949
Max Production Capacity	10000 Piece/Pieces per Month
Samples	Charge

 

1. Standard Exporting package.

2. Original package or neutral package.

3. According to clients ' needs.

4. Shipped in10-35 days after payment.

A. SASO for K.S.A

B. CIQ for Egypt, Ethiopia

C. COO, certified CI for Egypt, Argentina

D. Form A for European countries

E. Form E for Malaysia

F. Form F for Chile

G. COC for Algeria, Kenya, Bangladesh, Hatti, Nigeria

1) Unscrew the compression nut on the housing and remove the nut together with the housing.
2) Unscrew the fastening nut on the rotor shaft, remove the support washer, and remove the rotor when turning the rotor nozzle into the notch of the oil deflector.
3) Turn the rotor fastening nut, the rotor cover assembly can be removed.
When the rotor assembly is assembled, the flange at the lower part of the shroud should be embedded in the positioning groove of the rotor body so that the oil outlet hole of the shroud is aligned with the oil outlet hole of the rotor body, and the oil outlet hole of the rotor body should be removed Blocked due to oil, leaving the rotor does not turn. Rotor cover and rotor body of the bosses should be aligned, otherwise it will undermine the dynamic balance of the rotor assembly. Rotor body rubber seal shall not leak installed, the rotor can not tighten the nut too tight. Otherwise it will destroy the normal work of the rotor.
4) The tightening torque of the fastening nut on the rotor shaft is 29 - 49 N "m and must not be over tightened. The support washer under the nut shall be polished to the rotor, shall not be leak-mounted, nor shall the support washer The lower plane is 0.5mm from the upper plane of the rotor, and the rotor is limited by the support washer when the rotor rotates upward at high speed. If the unpolished surface is directly against the rotor or the drain support washer, the spring is directly pressed against the rotor, .     
5) The rotor shaft with clearance fit, remove or install the rotor do not pull the rotor shaft, so as not to deform the rotor shaft, causing the rotor does not turn.    
6) When installing the cover, the sediment in the groove of the base seal ring should be removed cleanly. The tightening torque of the compression nut should be 29-49 "m and should not be too tight.    
7) Rotor thrust bearing on the film aperture deviation (loose) is greater than the film aperture deviation (tight), the assembly can not be installed anti-reversed.

As one of the leading manufacturers and suppliers in China, our distributors spread around the world. Please be free to wholesale the wholesales oil pump screen collector 372-1010010 for chery s11 qq sweet mvm 110 from our factory. Fast delivery and good after-sale service are available.